|Gland Seals (GS)MFP Seals’ GS Seal is a modern day, heavy-duty gland seal, used for enhanced performance, in place of an O-Ring or O-Ring and Back-Up Ring combination, used to seal threaded glands in Mobile Hydraulic cylinders. The GS provides a high dynamic, pressure energized sealing effect, with 4 sealing contact points that increase in radial force as pressures increase. The GS is primarily designed for heavy-duty, static sealing applications. Its unique design resists the extrusion and pressure damage that normally occurs with O-Ring gland seals. Typically made from our U2150 Ultraflex® Urethane, it is easy to install the GS seal over threaded glands without damage to the seal and provides excellent rebound resilience, hydrolysis and abrasion resistance.
|AS568 O-RingsMFP Seals produces O-Rings in inch and metric sizes. The inch sizes are produced to the Aerospace Standard 568 published by the Society of Automotive Engineers. These inch size O Rings are designated by a dash number referenced on the AS568C chart. This standard for O-Rings contains 379 sizes and MFP Seals stocks them in a wide range of materials. Common stock materials for these inch size O-Rings range from Aflas®, Ethylene Propylene (EPM, EPDM, EPR), Fluorocarbon (FKM, Viton® Fluorel®), Fluorosilicone, Highly Saturated Nitrile (HSN, HNBR), Neoprene®, Nitrile (Buna-N), Perfluoroelastomers, PTFE (Teflon®), Silicone, Urethane, FEP Encapsulated and more…
|AS568 Perfluoroelastomer (FFKM) O-RingsMFP Seals offers a full range of perfluoroelastomer O-Rings for use in a wide range of industries. For use in industrial, food & Drug, Semiconductor or Aerospace MFP Seals has a perfluoroelastomer O-Ring for you. MFP Seals perfluoroelastomer O-Rings are produced using materials that have been cross-linked using peroxide or a patented cross-linking system. This process ensures excellent chemical resistance, high temperature resistance as well as low temperature flexibility. Choose from a wide range of compounds to select a grade that is right for your application. MFP Seals stocks a range of its own Fluorochem® Perfluoroelastomer grades as well as a full range of Simriz compounds.
|Back-Up Rings for AS568 O-Rings MFP Seals produces Backup rings that are designed to keep O-Rings from extruding as well as Backup rings for U-Cups applications. These Back-up Rings are produced in either a contoured design, Split (MS28774) or Solid (MS27595) configuration and a wide range of materials are used to fit your application. You will find stock materials such as Fluorocarbon (FKM, Viton® Fluorel®), Hytrel®, Nitrile (Buna-N), Polyether Ether Ketone (PEEK™), PTFE (Teflon®), & Urethane.
|Back Up Rings for U Cup Seals
|Metric O-RingsMFP Seals produces a broad range of both European and Japanese Industrial Standard O-Rings. Producing to the British Standard BS 1806, French Standard NFT47-501, German Standard DIN 3771, International Standard ISO 3601-1, Japanese Industrial Standard JIS B 2401, & Swedish Standard SMS 1586. Common stock materials for these metric O-Rings are Fluorocarbon (FKM, Viton® Fluorel®) & Nitrile (Buna-N) but MFP has tooling and is capable of producing metric O-Rings from just about any material you would require.
|Metric Back-Up Rings for O-Ring Groove
|Metric Back Up Rings for U Cup Seals
|Square Ring Seals
|Split Flange Seals
|O-Ring Cord Extrusion